Title Posted
Misconceptions about Torch Jun 2008
Point defense laser clusters Jun 2008
The League vs the Star Empire of Manticore: <em>Who declares war on who?</em> Jun 2008
Status of the Solarian League Navy Jun 2008
The Cherwell Convention's Equipment Clause May 2008
White Haven's relief mission to Yeltsin May 2008
Escort CLACs May 2008
Capital ships and raiding defenses May 2008
Map of the planet Safehold (as of <em>By Schism Rent Asunder</em>) May 2008
Removing Giancola from office Feb 2008


Narrow the posts above by selecting a series or specifying a keyword.


Pearls of Weber

A collection of posts by David Weber containing background information for his stories, collected and generously made available Joe Buckley.

Impeller rooms

  • Series: Honorverse
  • Date: October 22, 2002

Impeller rooms are cylindrical volumes located within the hull and centered fore-and-aft on the impeller ring they serve. The diameters of civilian impeller rooms are approximately 60% of the diameter of the impeller ring and approximately 1.2 times as long as they are across. They normally consist of a single, very large compartment crammed with the required generators and node support hardware. Military impeller rooms are approximately 85% as wide as the diameter of the impeller ring and approximately 1.6 times as long as they are broad. They are also subdivided — normally into quarters in smaller vessels (through CL), eighths (CA-BC), or twelfths (DN-SD) — with the individual compartments heavily bulkheaded and armored to localize and contain damage. Since the outbreak of the war, the RMN and GSN have begun dividing impeller rooms in ships of the wall into 16ths — one for each beta node. These individual compartments are arranged in clusters around the long axis of the ship with each forming a smaller cylinder, bundled together with their fellows within the volume of the overall "impeller room." Thus a modern RMN SD would refer to "Impeller One" or "Impeller Two" to indicate (respectively) the forward or aft impeller rooms, and then to "Impeller Eleven," "Impeller Twelve," or "Impeller Thirteen" to indicate the subcompartments within Impeller One. (That is, "Impeller 1.1" would be referred to as "Impeller Eleven," "Impeller 1.2" would be referred to as "Impeller Twelve," etc.)